Hi everyone,
I have a problem with the power on of a vm. The power-on task fails with the message: Failed - Module 'FTCpt' power on failed.
In the vmware.log file of the vm I have this:
2019-11-11T07:27:33.888Z| vmx| I125: FILE: File_GetVMFSAttributes: could not open /vmfs/volumes/5db97b0f-31818374-f87f-38eaa7930360/SCA085SUP/.ft-generation: No such file or directory
2019-11-11T07:27:33.888Z| vmx| W115: FTCpt: (0 unk) Error getting VMFS mount info for "ft.lockFile" = "/vmfs/volumes/5db97b0f-31818374-f87f-38eaa7930360/SCA085SUP/.ft-generation".
2019-11-11T07:27:33.888Z| vmx| W115:
2019-11-11T07:27:33.888Z| vmx| W115: FTCpt: (0 unk) Error: FT requires a valid value for "ft.lockFile"
2019-11-11T07:27:33.888Z| vmx| I125: Module 'FTCpt' power on failed.
2019-11-11T07:27:33.888Z| vmx| I125: VMX_PowerOn: ModuleTable_PowerOn = 0
2019-11-11T07:27:33.888Z| vmx| I125: Vix: [mainDispatch.c:1180]: VMAutomationPowerOff: Powering off.
2019-11-11T07:27:33.889Z| vmx| W115: /vmfs/volumes/5db6be0c-09660438-1c76-38eaa7930360/SCA085SUP/SCA085SUP.vmx: Cannot remove symlink var/run/vmware/0/234791768610_2122308/configFile: No such file or directory
2019-11-11T07:27:33.889Z| vmx| I125: WORKER: asyncOps=0 maxActiveOps=0 maxPending=0 maxCompleted=0
2019-11-11T07:27:33.905Z| vmx| I125: Vix: [mainDispatch.c:4239]: VMAutomation_ReportPowerOpFinished: statevar=1, newAppState=1873, success=1 additionalError=0
2019-11-11T07:27:33.906Z| vmx| I125:
2019-11-11T07:27:33.906Z| vmx| I125+ Power on failure messages: Module 'FTCpt' power on failed.
2019-11-11T07:27:33.906Z| vmx| I125+ Failed to start the virtual machine.
2019-11-11T07:27:33.906Z| vmx| I125:
Can everybody tell me how to fix this? I can't turn the vm on even from the vCSA.
Thanks for your replies